General FAQs:

 General Installation Instructions

General Installation Warnings:

  • Failure to properly follow instructions and precautions can cause you to be seriously burned or injured.

  • Work should only be done by a qualified technician.

  • Make sure the engine is off, battery is disconnected, and key is out of ignition before you begin any work on fuel-related parts.

  • Keep all cigarettes, sparks, and flames away from all fuel-related parts.

  • Work in well ventilated area

  • Smoking or allowing flames or sparks in the workarea or where gasoline is stored can cause a fire or explosion.

  • Refer to manufacturer’s model specific service manual before beginning any work on fuel system.

  • Carefully drain fuel tank and fuel lines into proper storage container.

  • Never drain or store gasoline in an open container.

  • Remove any gaskets, seals, or o-rings from part to be replaced.

  • Clean any sealing surfaces of dirt or debris using only a nonflammable solvent.

  • Install new fuel petcock and fuel line according to manufacturer’s stated procedure in model specific service manual.

  • Inspect for leaks before use.

1 Items Found

Model Specific FAQs:

0 Items Found